<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>汇三汇科技 - 产品问答</title>
    <link>https://www.huisanhui.com/forum-51-1.html</link>
    <description>Latest 20 threads of 产品问答</description>
    <copyright>Copyright(C) 汇三汇科技</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 06 Jul 2026 23:41:55 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.huisanhui.com/static/image/common/logo_88_31.gif</url>
      <title>汇三汇科技</title>
      <link>https://www.huisanhui.com/</link>
    </image>
    <item>
      <title>如何合理维护备用泵？</title>
      <link>https://www.huisanhui.com/thread-175-1-1.html</link>
      <description><![CDATA[在购泵初期，听从了销售人员的建议。共买了两台泵，一台直流泵正常运行，另一台柴油泵以作备用。时隔一年，备用泵只因在停电的情况下用了一次，电源恢复后就放在那里一直没动。近日因直流泵轴承损坏，启用备用柴油泵工作。哪知开机不到20分钟，轴承也跟着损坏。我就纳 ...]]></description>
      <category>产品问答</category>
      <author>陌路人</author>
      <pubDate>Mon, 04 Mar 2024 09:17:23 +0000</pubDate>
    </item>
    <item>
      <title>导热油离心泵可以用来抽水吗？</title>
      <link>https://www.huisanhui.com/thread-174-1-1.html</link>
      <description><![CDATA[公司准备自建水塔,需要专用水泵向塔内供水。有朋友向我推荐导热油离心泵。导热油离心泵是否可以完成任务？]]></description>
      <category>产品问答</category>
      <author>陌路人</author>
      <pubDate>Mon, 04 Mar 2024 09:10:52 +0000</pubDate>
    </item>
    <item>
      <title>精馏塔用什么泵合适？</title>
      <link>https://www.huisanhui.com/thread-171-1-1.html</link>
      <description><![CDATA[我这里是精馏塔，物料是DMAC和水的混合物，系统真空度达到-.0092mpa，最高温度120度，不锈钢材质，不知道用什么泵比较合适，推荐一下。]]></description>
      <category>产品问答</category>
      <author>陌路人</author>
      <pubDate>Tue, 30 Jan 2024 22:09:05 +0000</pubDate>
    </item>
    <item>
      <title>买泵备用，水泵有没有必要？</title>
      <link>https://www.huisanhui.com/thread-170-1-1.html</link>
      <description><![CDATA[采购中遇到这样的问题，明明只需要购买一台水泵，可卖家极力推荐购买两台，原因是以做备用。我想没有这个必要吧。是不是商家为了增加销量而找的说词？]]></description>
      <category>产品问答</category>
      <author>陌路人</author>
      <pubDate>Sun, 28 Jan 2024 10:18:58 +0000</pubDate>
    </item>
    <item>
      <title>为何某类泵配置防爆电机？</title>
      <link>https://www.huisanhui.com/thread-169-1-1.html</link>
      <description><![CDATA[问：我们接触的泵都是配置普通电机，为何有的用户要求配置防爆电机？

答：泵在工作时，是配置普通电机还是防爆电机，得根据输送介质或使用环境决定。配置防爆电机的环境一般是用于煤矿、石油天然气、石油化工和化学工业。因为电机上电很可能产生电火花，而像天然气这类 ...]]></description>
      <category>产品问答</category>
      <author>东坡剑</author>
      <pubDate>Sun, 28 Jan 2024 10:11:44 +0000</pubDate>
    </item>
    <item>
      <title>隔膜泵与普通水泵的区别</title>
      <link>https://www.huisanhui.com/thread-157-1-1.html</link>
      <description><![CDATA[隔膜泵能够完全无泄漏地输送介质，介质从进入泵入口到被排出泵的出口，泵的结构设计上没有动密封，介质与大气之间被隔膜隔开。而普通水泵一定有动密封，密封型式有填料密封和机械密封。两种密封都不可避免的存在泄漏，填料密封大一些，机械密封小一些。

其二、隔膜泵一 ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Fri, 26 Jan 2024 11:12:01 +0000</pubDate>
    </item>
    <item>
      <title>启动水泵超出额定电流，为什么？</title>
      <link>https://www.huisanhui.com/thread-148-1-1.html</link>
      <description><![CDATA[启动水泵时，只要将水泵的出口阀门打开30%以上（超出百分之三十），电机的电流将超出额定电流。为什么？如何解决？

      水泵超出额电流有以下几种原因，请针对不同情况分别处理：
      1、我们强调的是空载启动水泵，即：将出口阀关闭启动电机电源。相关文章可以参 ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Thu, 25 Jan 2024 10:55:55 +0000</pubDate>
    </item>
    <item>
      <title>叶轮进口边磨穿的原因</title>
      <link>https://www.huisanhui.com/thread-147-1-1.html</link>
      <description><![CDATA[叶轮进口边磨穿如图所示，试分析根源出在什么地方？



日常维护非常重要，不管是水泵、油泵还是化工等等泵，都是要进行检查运行状态。在上面的图中，用户就是未进行常规检查的结果，轴承坏了，无人得知，叶轮进口边缘与泵体进口边缘的摩擦、泵轴与泵盖的摩擦，让泵轴、 ...]]></description>
      <category>产品问答</category>
      <author>东坡剑</author>
      <pubDate>Thu, 25 Jan 2024 10:50:34 +0000</pubDate>
    </item>
    <item>
      <title>启动水泵时，为何必关出口阀？</title>
      <link>https://www.huisanhui.com/thread-146-1-1.html</link>
      <description><![CDATA[我们大家都知道，启动水泵时一定要先关闭出口阀门。但是，为什么要这样做呢？有很多用户就回答不出来，不知原因所在，其实了解了它的真正原因，会对日常正确操作引起重视，对延长水泵的使用寿命有很大帮助。下面就分享下它的正确答案。水泵闭阀启泵，是因为水泵轻载启动 ...]]></description>
      <category>产品问答</category>
      <author>东坡剑</author>
      <pubDate>Thu, 25 Jan 2024 10:45:19 +0000</pubDate>
    </item>
    <item>
      <title>高压加氢注水泵如何选型？</title>
      <link>https://www.huisanhui.com/thread-145-1-1.html</link>
      <description><![CDATA[针对加氢注水泵的选型一直有争议，有人认为选择往复泵比较好，因为往复泵的出口压力可以满足加氢系统的要求，对于投入资金来说相对较少；其次是加工量低，对注入的除盐水流量小。有人认为选择高速离心水泵比较好，因为离心水泵的故障率低，维护方便。由此看来往复泵和离 ...]]></description>
      <category>产品问答</category>
      <author>东坡剑</author>
      <pubDate>Thu, 25 Jan 2024 10:43:43 +0000</pubDate>
    </item>
    <item>
      <title>水泵漏水故障如何处理？</title>
      <link>https://www.huisanhui.com/thread-144-1-1.html</link>
      <description><![CDATA[问：一台30kw水泵在运行时不泄漏，停车再开时开始漏水，为什么？如何处理这个问题？
答：水泵漏水的情况要视情况分析，首先要检查泵体及其部件是否完好，有无沙眼渗漏。如果不存在沙眼问题，请按下面方法解决。
      水泵在长期稳定运行中，机密封的动环与静环之间会形 ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Thu, 25 Jan 2024 10:40:08 +0000</pubDate>
    </item>
    <item>
      <title>联轴器要不要动平衡修正？</title>
      <link>https://www.huisanhui.com/thread-113-1-1.html</link>
      <description><![CDATA[我们知道水泵或热油离心泵的叶轮要通过动平衡修正，才能保证水泵、热油离心泵等泵产品的运行平稳。而联轴器做为泵产品运动中的一部份，是不是也要进行动平衡修正？不进行修正有没有不良后果？希望坛友参与讨论。
 ...]]></description>
      <category>产品问答</category>
      <author>水钻打孔</author>
      <pubDate>Sat, 23 Dec 2023 11:14:48 +0000</pubDate>
    </item>
    <item>
      <title>水泵电机烧坏是什么原因？</title>
      <link>https://www.huisanhui.com/thread-82-1-1.html</link>
      <description><![CDATA[55KW热油泵，开机不到半小时，电机发出一股胶臭味，关机后再开电机再也无法启动，看样子是坏了，有朋友知道是啥原因吗？]]></description>
      <category>产品问答</category>
      <author>陌路人</author>
      <pubDate>Mon, 09 Jan 2023 10:35:50 +0000</pubDate>
    </item>
    <item>
      <title>水泵为何关出口阀后才能停车？</title>
      <link>https://www.huisanhui.com/thread-78-1-1.html</link>
      <description><![CDATA[水泵在运行过程中，我们都按照常规进行操作，启动水泵时先检查出口阀是否关闭，然后在上电启动，当电机运行平稳时再缓缓打开出口阀调节自己需要的流量。当关闭水泵时，也是先关闭出口阀再去切断电源。我们都是按照这个流程进行操作！但有部分人出于好奇，不知道什么原因 ...]]></description>
      <category>产品问答</category>
      <author>张大泙</author>
      <pubDate>Wed, 04 Jan 2023 14:49:35 +0000</pubDate>
    </item>
    <item>
      <title>水泵运行时是先灌水还是先开车</title>
      <link>https://www.huisanhui.com/thread-19-1-1.html</link>
      <description><![CDATA[问：在泵设备运行时，有人认为先开车再向泵体内灌水；有人认为应先灌水再启动动力。这两种说法谁最正确？为什么？
Q: When the pump equipment is running, some people think that the pump should be started first and then filled with water; Some people think th ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Sat, 05 Nov 2022 12:16:06 +0000</pubDate>
    </item>
    <item>
      <title>如何确定金加工测量工具</title>
      <link>https://www.huisanhui.com/thread-12-1-1.html</link>
      <description><![CDATA[The quality of a product determines its performance and service life, and quality is not a word of mouth, but the result of tool testing. How to determine the measuring tools? Generally, the measuring tools to be tested include the following:
产品的 ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Wed, 02 Nov 2022 12:49:18 +0000</pubDate>
    </item>
    <item>
      <title>水泵的喘震现象如何解决</title>
      <link>https://www.huisanhui.com/thread-11-1-1.html</link>
      <description><![CDATA[水泵在运行过程中，出现不间断的震动，象抽筯一样，有时又平稳正常。是水泵的质量问题还是使用问题？如何解决？
During the operation of the water pump, there is an uninterrupted vibration, which is as smooth and normal as the pumping. Is it the quality prob ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Wed, 02 Nov 2022 12:41:34 +0000</pubDate>
    </item>
    <item>
      <title>热泵技术是一个什么样的技术</title>
      <link>https://www.huisanhui.com/thread-5-1-1.html</link>
      <description><![CDATA[热泵理论源于19世纪，通过众多科学家长达80年的大量研究，于1912年在瑞士安装成功。
The heat pump theory originated in the 19th century, and was successfully installed in Switzerland in 1912 after 80 years of extensive research by many scientists.

早期的 ...]]></description>
      <category>产品问答</category>
      <author>adminn</author>
      <pubDate>Tue, 01 Nov 2022 07:12:01 +0000</pubDate>
    </item>
  </channel>
</rss>